Page 11 - BENK YAPI - Construction Chemicals
P. 11

• In wet volume applications, the recommended   Mixing Time
           surface should be waterproofed with Wasserdamm  It should be mixed with the help of a low-speed mixer so that
           elastic or Wasserdamm fully elastic product before   there are no dry powders and lumps. Mortar, 5-10 min. 1 - 2
           laying ceramic tiles.              minutes before the application after resting. should be
                                              mixed again.
      Application Methods
        • Benkim granite marble adhesive should be applied  Application Equipment
           to the surface with a notched trowel determined   • Notched steel trowel determined according to the size of the
           according to the size of the ceramic and the   ceramic and the structure of the floor.
           structural condition of the surface.  • Rubber-tipped ceramic rammer
        • During application, care should be taken that Benkim
           granite marble adhesive does not form a film on the  Equipment Cleaning
           surface. The adhesive that has formed a film on its   After the application, the mortar on the used equipment should
           surface should be scraped from the floor and should  be cleaned with water before it dries.
           not be reused.
        • The coating material should be placed on the surface  CONSUMPTION / CONSUMPTION
           and it should be placed on the surface with a rubber- The amount of consumption varies according to the condition of
           tipped mallet.                     the application surface and the size of the coating material used.
        • The grouting process should be started at least 24
           hours after the bonding process. Application should  PACKAGING
           be made with Benkim Joint Filler, Benkim Joint Filler  Benkim Granit Marble adhesive mortar is presented in 25 kg
           Flex or Benkim Silicone Joint.     kraft bags.
        • In outdoor applications, double-sided bonding should
           be applied for large-size coating applications.  SHELF LIFE
           Application Suggestions            It is 6 months when stored in its unopened original package in a
        • After mixing the product, it should be used within   dry and cool environment.
           the pot life. Products that have expired during the
           application should never be used.  STORAGE CONDITIONS
        • Any foreign material such as lime, cement, plaster   It should not be left in direct sunlight. The mouth of the
           should not be added to the prepared mortar.  containers should be tightly closed when not in use.
        • Extra water should not be added to the mixture.
        • Application should not be made on unstable   WARNINGS
           surfaces. The durability and bearing of the old   Zϯϲͬϯϴ ͗  Irritating to eyes and skin.
           surfaces should be checked before the application   Zϰϯ͗    May cause sensitization and sensitization by skin contact.
           process.                           ^Ϯ ͗  Keep out of reach of children.
        • During and after the application, the surface should  ^ϮϰͬϮϱ ͗ Avoid contact with eyes and skin.
           be protected from air currents and contact with   ^Ϯϲ  ͗  In case of contact with eyes, rinse immediately with
           water should be prevented.         plenty of water and seek medical advice.
        • It should not be applied on surfaces where there is a  ^Ϯϴ ͗ In case of skin contact, wash immediately with plenty of
           danger of frost within 24 hours, frozen or melting   water.
           frost.                             ^ϯϳ ͗ Appropriate protective gloves should be used.
        • In hot weather, care should be taken not to expose
           the material to direct sunlight and the mixture
           should be made with cold water.
        • Application should not be made on extremely windy
           or hot surfaces exposed to direct sun.
         • Application should not be made in rainy weather, the
           application surface should be protected from rain for
           24 hours.
      Surface and Ambient Temperature
      During application, the surface and ambient temperature
                     o
      should be between +5 C and +35 C.
                            o
       APPLICATION INSTRUCTIONS
       Mixing ratio
       4.0 - 6.0 liters of water for 25 kg packaging
       Mixing Equipment
         • Low speed electric mixer (400 rpm)
         • Special tip mixing equipment
                                                                                       11
   6   7   8   9   10   11   12   13   14   15   16